What steps are needed to use the automatic sealing machine

With the rapid development of packaging industry, more and more types of packaging machinery, and more and more automation. At present, the more popular packaging machinery in the market is the automatic sealing machine. Through the investigation of many well-known enterprises, it is found that the reason why the automatic tape sealing machine has such a development trend is loved by manufacturers in all walks of life. According to years of production experience, the sealing machine manufacturer has developed a kind of equipment suitable for the needs of the public, which not only has precise and durable performance, but also has structural design In addition, it can ensure the smooth, standard and beautiful sealing effect and improve the image of the enterprise.

Like other packaging machines, sealing machines need to know how to use them to ensure correct, reasonable and safe production. First time operators should read the operation manual carefully before use, to avoid reckless operation leading to poor sealing effect of tape sealing machine or causing unnecessary failure.

1. First, place the sealing machine on the horizontal ground, lock the brake caster, adjust the stand foot to the suitable height, so that the machine frame seat is horizontal;

2. Place the cartons to be sealed on the conveyor table:

A. Adjust the lifting handle so that the conveying bottom plane of the upper belt head seat is about 3-5mm lower than the height of the carton;

B. Loosen the locking hand wheel II, adjust the conveying chuck to make the conveying chuck close to the carton, and then lock the locking hand wheel II;

C. Adjust the positioning wheel of the carton so that the positioning wheel of the carton and the conveying clamp are close to the carton at the same time, and then lock the hand wheel I

3. Turn on the power switch to make the machine work, and then push the carton to seal the box. If it is found that the tightness and looseness of the upper and lower sealing tapes are inconsistent, adjust the knob of the tape barrel seat (generally, if the tape is too tight, release the spring pressure; if the tape is too loose, tighten the spring pressure);

4. If the length of both ends of the sealing tape is different, adjust the cutting blade in the tape head (generally the head is long and the tail is short. Adjust the cutting blade, loosen the locking screw of the cutting blade, move the cutter outward a little, and then lock the screw; otherwise, if the head is short and the tail is long, move the cutter inward a little).