No matter what kind of machine is used for a period of time, there will be different sizes of faults. The failure of automatic sealing machine has the phenomenon of card box, which is a small problem that many users will encounter when using. In every production and packaging enterprises basically have automatic sealing machine, which is an indispensable mechanical equipment, and its convenience makes many customers the first choice of automatic sealing machine.
Solutions to the problem of jam in the operation of automatic sealing machine:
First of all, the width or height adjustment degree of the sealing machine is too small, because the machine adjusts the corresponding width and height manually in the process of transporting cartons, so there will always be a little deviation, resulting in the height and width can not reach the accuracy degree, making the carton and the sealing machine can not fully match, resulting in the phenomenon of box jam. A good way to solve this problem is to put the carton on the working table of the sealing machine, and then adjust the height and width of the machine according to the size of the carton.
Automatic sealing machine
Secondly, due to the carton weight is too light, can not pass through the movement. The principle of sealing tape of automatic sealing machine is to press the carton by the sealing machine, and then impact the belt guide roller in the process of transportation, so as to realize the automatic sealing of the tape on the carton. However, due to the carton is too light, so that can not understand the guide roller, so there will be a card box phenomenon. However, this phenomenon is relatively rare, because there are products in the cartons, and the specifications of the cartons are in accordance with the standards, and the design will be reasonable.
Another reason is that the tape is not cut off in time. After the automatic sealing machine is used for a period of time, a lot of debris and dust of the tape will be stuck on the cutter, which will cause the cutter to be not sharp and cut the tape continuously. If the tape is cut continuously, the carton will be stuck in the sealing machine and can not be transported continuously. The way to solve this problem is to clean or replace the cutter.