Understand the function and characteristics of corner sealing machine

We should be familiar with the sealing machine, but when it comes to corner sealing machine, many people are not familiar with it. The working principle of the corner sealing machine is to seal the eight corners and four sides of the carton with instant adhesive tape, and it can be adjusted according to the size of the carton. It can not only achieve beautiful effect, but also play an economic and rapid role. The corner sealing machine normally works with the one word box sealing machine, and can flexibly change the angle to complete the I-shaped box sealing machine.

Some people think that it is necessary to seal the box with corner sealing method, just the ordinary upper and lower sealing box is also OK? In fact, many areas are in the rainy season or humid areas, so the sealing effect of corner sealing edge is very good, which plays a role of moisture-proof and waterproof. In addition, with the use of A-shaped sealing machine, the sealing effect is better.

The structure of the corner sealing machine is to adopt the transmission design mode, use the upper and lower leather belts to transport the cartons, and then automatically seal the four corner edges of the carton with the installed instant adhesive tape. Automatic corner sealing machine can only be applied to cartons of the same specification in the same production line by manually adjusting the width and height; while the full-automatic corner sealing machine is more intelligent and automatic, it can sense and automatically adjust the width and height, and can automatically adjust the width and height according to different specifications of cartons, with high speed and high efficiency.

However, there are some small problems in the working process of the sealing machine. For example, the carton is stuck because of the error in the width and height of the adjustment; or the carton is too light to pass through the movement; or the cutter is not cleaned and replaced for a long time, which makes it not sharp enough and cuts the tape continuously during operation. According to experience, all these problems can be solved immediately.