欢迎来到研茂智能装备(苏州)有限公司官网!

CN

1591596640179948.png   咨询热线:400-850-175

新闻banner
Location : Home >> News >> Industry information

Contact Us

Yanmao intelligent equipment (Suzhou) Co., Ltd

Contact person: Mr. Ren

Contact person: Mr. Liu

Tel: 400-850-1759

Tel: 400-850-1758

website: www.zbsmdj.cn

Address: Building 8, Taisheng Industrial Park, No. 11, Xingye South Road, high tech Zone, Taicang City, Jiangsu Province

Introduction to the working process of semi-automatic sealing machine

2020-06-02 16:34:27

The automation of machinery is an inevitable trend, but from manual to automatic, it is more difficult to accept in terms of technology or workers' acceptance ability. Therefore, before the transition to full-automatic mechanization, semi-automatic equipment like this appears, which is more likely to be accepted by the market. After all, users are very worried that if the automation of automatic machinery is realized, it will be more acceptable If the system breaks down, there is no way out at all, while the semi-automatic can continue to complete the task manually.

In the above, we have learned about the differences between automatic sealing machine and semi-automatic sealing machine. Today, I will continue to understand the specific working process of semi-automatic sealing machine.

1. Installation of tape coil: install the tape roll on the tape holder of the sealing machine, and adjust the adjusting plate on the belt feeding device until the belt tube can be clamped. Adjust the tension adjustment knob until the tape is pulled, and the tape can still rotate smoothly. Pull out the tape with appropriate length and install it on the roller.

Introduction to the working process of semi-automatic sealing machine

2. Adjust the machine: loosen the foot nut, adjust the height of the worktable according to the operation needs, and then lock the nut, take the packing case to be sealed and put it at the back of the workbench, and make the sewing direction of the carton to be sewn consistent with the conveying direction of the sealing machine, shake the height adjusting handle to make the roller press to the upper surface of the carton.

3. Sealing process operation: press the power switch, start the machine, put the packing box on the conveying platform, manually send the carton into the conveyor belt to seal the box. After the sealing machine is finished, manually place the carton at the designated place, and then turn off the power switch to ensure safe operation.

The above three steps are a working cycle of the sealing machine. It is relatively simple, but for enterprises with fewer carton specifications or the same batch of carton sealers at the same time, this semi-automatic sealing machine is much more efficient than the automatic sealing machine.

The structure of semi-automatic sealing machine is relatively simple and its performance is very stable. At the same time, the price of semi-automatic sealing machine is economical and affordable. It is a small expert in the packaging of enterprise carton sealing machine.

Recently: