欢迎来到研茂智能装备(苏州)有限公司官网!

CN

1591596640179948.png   咨询热线:400-850-175

新闻banner
Location : Home >> News >> Industry information

Contact Us

Yanmao intelligent equipment (Suzhou) Co., Ltd

Contact person: Mr. Ren

Contact person: Mr. Liu

Tel: 400-850-1759

Tel: 400-850-1758

website: www.zbsmdj.cn

Address: Building 8, Taisheng Industrial Park, No. 11, Xingye South Road, high tech Zone, Taicang City, Jiangsu Province

This paper introduces the automatic I-type sealing machine, which is the best-selling product of the sealing machine manufacturer

2020-06-08 13:52:33

Automatic folding cover sealing machine and automatic four corner box sealing machine are commonly used packaging equipment for carton sealing, and are also widely used in various industries. The effect of the two types of equipment used together is "H" type, also known as "I" type, so it is called "I-type box sealing machine" in the packaging industry!

The sealing process of manual I-shaped sealing and equipment I-shaped sealing is as follows:

First of all, the working process of manual I-shaped sealing: open the carton manually, then seal the bottom of the carton in a zigzag way first, then seal the bottom side of the carton and seal the two sides of the bottom of the carton after sealing, and then pack the products in the reverse direction. After the packing is completed, seal the upper part of the carton with a zigzag seal, and then seal both sides of the upper side of the carton. This is the manual I-shaped sealing process. If the packing time is deducted In general, it takes at least 15 seconds to seal a box, that is, 4 cases in a minute. If the manual sealing does not stop, the quantity of 240 cases in an hour will be less than that;

Then adopt the process of I-shaped sealing machine: manually fold the bottom of the carton and put it in the packing roller frame of the equipment, and then pack the products. After the packing is completed, the upper and lower I-shaped sealing of the I-shaped box sealing machine can be promoted. If the packing time is deducted, it only takes about 7 seconds to seal a box of I-shaped box, that is, at least 8 cases can be sealed in one minute, and 480 cases in an hour The device can not stop sealing!

The difference between manual I-type sealing and equipment I-shaped sealing is as follows:

There is a sharp contrast between manual I-type sealing and equipment I-shaped sealing. The introduction of I-shaped sealing opportunities has obtained various advantages. Firstly, the efficiency has been significantly improved; secondly, the labor cost has been reduced; thirdly, the beauty of sealing has been greatly improved to reduce the waste of material cost; fourthly, the workload of employees has been reduced and the staff has been more stable.


Recently: